Keithley 2302 - SCPI Programming

5-6 Relay Control
SCPI programming
Table 5-2
SCPI command — output relay control
Command Description Default
OUTPut[1] OUTPut subsystem fro Channel #1 (battery channel):
:RELay1 <name> Close (ONE) or open (ZERO) relay control circuit
for relay 1.
ZERO
:RELay2 <name> Close (ONE) or open (ZERO) relay control circuit
for relay 2.
ZERO
:RELay3 <name> Close (ONE) or open (ZERO) relay control circuit
for relay 3.
ZERO
:RELay4 <name> Close (ONE) or open (ZERO) relay control circuit
for relay 4.
ZERO
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com