Keithley 2302 User Manual

16-2 Replaceable Parts
Introduction
This section contains replacement parts information.
Ordering information
To place an order, or to obtain information concerning replacement parts, contact your
Keithley representative or the factory. When ordering parts, be sure to include the following
information:
• Instrument model number (for example, Model 2306)
• Instrument serial number
• Part description
• Component designation (if applicable)
• Keithley part number
Factory service
If the instrument is to be returned to Keithley Instruments for repair, perform the following:
• Call the Repair Department at 1-800-552-1115 for a RMA (Return
Material
Authorization) number.
• Complete the service form at the back of this manual, and include it with the instrument.
• Carefully pack the instrument in the original packing carton or equivalent.
• Write ATTENTION REPAIR DEPARTMENT and
the RMA number on the shipping
label.
Parts lists and component layouts
The parts lists for the Models 2306 are listed separately in tables on the following pages. For
part numbers to the various mechanical parts and assemblies, use the assembly drawings
provided at the end of Section 15. Component layout drawings are provided at the end of this
section:
• Digital board – 2306-100
• Analog board – 2306-120
• Display board – 2306-110
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com

Keithley 2302 Specifications

General

Brand	Keithley
Model	2302
Category	Power Supply
Language	English