• Overview — Provides an overview of the long integration measurement process.
• Measurement configuration — Explains how to configure the instrument for long
integration measurements.
• Long integration measurement procedure — Provides the step-by-step procedure to per-
form long integration measurements from the front panel.
• SCPI programming — Documents the commands used to program the instrument for
long integration measurements including FAST, SEARch and DETect usage.
• Programming examples — Include programming examples to perform long integration
measurements.
NOTES This manual covers Keithley Models 2302, 2302-PJ, 2306, 2306-PJ, and 2306-VS
simulators (power supplies). Since the Model 2302 and 2302-PJ are single channel
battery simulators, functions related to the second channel (i.e., the charger channel)
are not available for the Model 2302 and 2302-PJ. Therefore:
• battery and charger channel features contained in this manual apply for the
Models 2306, 2306-VS and 2306-PJ
• only battery channel features contained in this manual apply for the Model 2302
and 2302-PJ
Refer to Appendix F for specific Model 2302 and 2302-PJ information.
Information contained in this section applies to all power supply channels (unless
otherwise noted). In this manual, channel 1 refers to the battery channel while chan-
nel 2 refers to the charger channel (2306, 2306-VS and 2306-PJ feature only).
4
Long Integration Measurements
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
