Kemppi X8 MIG User Manual

X8 MIG WELDER 2.3 Installation
1-2 mm
8.
Attach the guide nut at the tip of the sleeve.
9.
Re-assemble the neck and tighten the neck tightener to secure.
Changing neck (gas-cooled gun)
You can change the neck without tools.
1.
Turn the neck tightener half a turn counter-clockwise to loosen it, and pull the neck out.
OPERATING MANUAL | EN 66
©
KEMPPI | 2018-09-28

Kemppi X8 MIG Specifications

General

Brand	Kemppi
Model	X8 MIG
Category	Welding System
Language	English