MLS-BA-defsi-0713
93
05 Print report
In this menu item you can activate the function for printing your calibrating data
Ö Use the cursor (►) to select “05 “Print report “
Ö Press the -key; the current menu item blinks.
Use the arrow keys (see chapter 7.1) to save your
settings
0 Print report deactivated
1 Print report activated
Setup29.12.04 Setup
Ö Confirm by pressing the -key
Ö If Print report is activated you will receive a log of your adjustment data after
each adjustment (example):
*** External calibration report ***
Calibr. : External
Diff.. : -0.0624 g
Signature………………………….
To Next Page
Loading...
