IEEE-488 Subsystem
Command/Query Description
*CLS Clear status command.
*ESE<value>
*ESE?
Event status enable command and query.
*ESR? Event status event query.
*IDN? Identification Query. Returns the instrument’s identification string.
*LRN? Learn query. Returns the SCPI strings that reproduce the present instrument settings.
*OPC Sets the OPC (operation complete) bit in the standard event register.
*OPC? Returns a 1 to the output buffer when all pending operations complete.
*OPT? Returns a string identifying any installed options.
*PSC 0|1
*PSC?
Enables (1) or disables (0) the clearing of certain enable registers at power on.
*RCL <0 to 10> Recalls a saved instrument state.
*RST Resets the instrument to default values.
*SAV <0 to 10> Saves the instrument state to a nonvolatile memory location.
*SRE <value>
*SRE?
Service request enable command and query.
*STB? Status byte query. Reads the Status Byte Register, which contains the status summary bits and the Output
Queue MAV bit.
*TRG Trigger command. Applies a software trigger (equivalent to IEEE 488.1 Device Trigger) for both TRANsient and
ACQuire trigger groups.
*TST? Self-test. Returns the errors found during the most recent power-on self-test.
INITiate Subsystem
Command/Query Description
INITiate[:IMMediate]:ACQuire Initiates the ACQuire (measurement) operation.
INITiate[:IMMediate]:TRANsient Initiates the TRANsient operation.
INITiate:CONTinuous:ACQuire ON|1|OFF|0 Initiates a new measurement and enables or disables "continuous" mode.
LXI Subsystem
Command/Query Description
LXI:IDENtify[:STATe] ON|1|OFF|0
LXI:IDENtify[:STATe]?
Turns the front-panel LXI identify indicator (blinking "Lan" annunciator) on or off.
3SCPI Programming Reference
110 Keysight AC6800B Series Operating and Service Guide
To Next Page
Loading...