Keysight Technologies AC6801B - Page 112

STATus Subsystem
Command/Query Description
STATus:OPERation[:EVENt] Queries the event register for the Operation Status group.
STATus:OPERation:CONDition? Queries the operation condition register.
STATus:OPERation:ENABle <value>
STATus:OPERation:ENABle?
Sets the value of the enable register for the Operation Status group.
STATus:OPERation:NTRansition
<value>
STATus:OPERation:NTRansition?
STATus:OPERation:PTRansition
<value>
STATus:OPERation:PTRansition?
Sets and queries the value of the NTR (Negative-Transition) and PTR (Positive-Transition)
registers.
STATus:PRESet Initializes the transition and enable filters for both SCPI register groups (OPERation and
QUEStionable).
STATus:QUEStionable[:EVENt]? Queries the event register for the Questionable Status group.
STATus:QUEStionable:CONDition? Queries the condition register for the Questionable Status group.
STATus:QUEStionable:ENABle
<value>
STATus:QUEStionable:ENABle?
Sets the value of the enable register for the Questionable Status group.
STATus:QUEStionable:NTRansition
<value>
STATus:QUEStionable:NTRansition?
STATus:QUEStionable:PTRansition
<value>
STATus:QUEStionable:PTRansition?
Sets and queries the value of the NTR (Negative-Transition) and PTR (Positive-Transition)
registers.
3SCPI Programming Reference
112 Keysight AC6800B Series Operating and Service Guide