Keysight B1500A Configuration and Connection Guide
2-21
B1500A Accessories
Accessories for the wafer prober / connector plate
Table 2-13 Item number information of 16495K Connector Plate with Universal Cable Holder
Table 2-14 Connector plate overview
Item. Description OP Instruction
16495K Connector plate with
universal cable holder
16495K does not have any connections. This plate provides
the cable hole and the cover with rubber used to block the
light from the cable hole. This plate will be used with the
E5288A ASU or the N1301A-200 GSWU that will be
installed in the shielding box.
ATTENTION: Must specify 16495K-001
16495K-001 Connector plate with
rubber holder
The cable hole is to pass the cables from the ASU or
GSWU to the instrument such as B1500A, E5270B, and so
on. And the cables will be fixed to the shielding box by
using the cover with rubber that will close the opening of
the cable hole.
16495F (12 triax., Intlk, GNDU) 16495G (24 triax., Intlk, GNDU) 16495H (6 triax. 6coax., Intlk,
GNDU)
16495J (8 triax. 4 coax., Intlk,
GNDU)
16495K
Connector Plate with Universal
Cable Holder for ASU
16495K inside
To Next Page
Loading...
Need help?
General
