Keysight N5221A/22A Service Guide 3-29
Tests and Adjustments
System Verification
Figure 3-13 shows an example of typical verification results with Print Graphs
selected in the Printer Output area of the System Verification dialog box. The
printed graphical results show the following:
— the name of the device measured
— the serial number of the device
— the parameters measured
— Results of the measurements. Labeled as A in Figure 3-13.
— Data measured at the factory from the verification kit. Labeled as B in Figure
3-13.
— Upper and lower limit points as defined by the total system uncertainty
system. Labeled as C in Figure 3-13.
To Next Page
Loading...
