Keysight Technologies N6972A with Option 301

l The [SOURce:]VOLTage:SLEW:MAX command is coupled to the [SOURce:]VOLTage:SLEW com-
mand. If [SOURce:]VOLTage:SLEW sets the rate to MAX or INFinity,
[SOURce:]VOLTage:SLEW:MAX is enabled. If the slew rate is set to any other value,
[SOURce:]VOLTage:SLEW:MAX is disabled.
Keysight N6900/N7900 Series Operating and Service Guide 284
6 SCPI Programming Reference