Keysight RP7932A/RP7942A
RP7932A/RP7942A
Test Record
Report Number ______ Date__________
Test Description Model Min. Specs Results Max. Specs
Voltage Programming & Readback
Minimum voltage (Vout):
Voltage measured over interface:
High voltage (Vout):
Voltage measured over interface:
Both
Both
Both
Both
0.071984
Vout - 0.008016
79.976
Vout - 0.024
_______
_______
_______
_______
0.088016
Vout + 0.008016
80.024
Vout + 0.024
CV Load Effect:
Both - 0.003 _______ + 0.003
CV Ripple and Noise
peak-to-peak:
rms:
Both
Both
N/A
N/A
_______
_______
0.080
0.008
Transient response @ 300 µs:
Both - 0.80 _______ + 0.80
Current Programming & Readback
Minimum current (Iout):
Current measured over interface:
High current (Iout):
Current measured over interface:
Both
Both
Both
Both
- 0.013
Iout - 0.013
124.9495
Iout - 0.0505
_______
_______
_______
_______
0.013
Iout + 0.013
125.0505
Iout + 0.0505
CC Load Effect:
Both - 0.013 _______ + 0.013
Current Sink Tests
100% of current rating: Both - 124.9495 _______ - 125.0505
RP7932A/RP7942A UUT Settings RP7935A/RP7945A Load Settings
Voltage Programming & Readback Min:
Voltage Programming & Readback High:
CV Load Effect, CV Ripple and Noise:
Transient Response:
Current Programming & Readback Min:
Current Programming & Readback High:
CC Load Effect:
100% of current rating (Isink):
Voltage priority: 0.08 V, 63.75 A
Voltage priority: 80 V, 63.75 A
Voltage priority: 40 V, 127.5 A
Voltage priority: 40 V, 127.5 A
Current priority: 40.4 V, 0 A
Current priority: 40.4 V, 125 A
Current priority: 80.8 V, 62.5 A
Current priority: 40.4 V, - 125 A
not used
not used
Current priority: 40.4 V, 125 A
Current priority: 40.4 V, 62.5 A to 125 A, slew=2 A/µs
Voltage priority: 40 V, 0 A
Voltage priority: 40 V, 127.5 A
Voltage priority: 80 V, 63.75 A
Voltage priority: 40 V, 127.5 A
Keysight RP7900 Series Operating and Service Guide 283
6 Verification and Calibration
To Next Page
Loading...
Need help?
General
