Keysight RP7935A/RP7945A
RP7935A/RP7945A
Test Record
Report Number ______ Date__________
Test Description Model Min. Specs Results Max. Specs
Voltage Programming & Readback
Minimum voltage (Vout):
Voltage measured over interface:
High voltage (Vout):
Voltage measured over interface:
Both
Both
Both
Both
0.071984
Vout - 0.008016
79.976
Vout - 0.024
_______
_______
_______
_______
0.088016
Vout + 0.008016
80.024
Vout + 0.024
CV Load Effect:
Both - 0.003 _______ + 0.003
CV Ripple and Noise
peak-to-peak:
rms:
Both
Both
N/A
N/A
_______
_______
0.080
0.008
Transient response @ 300 µs:
Both - 0.80 _______ + 0.80
Current Programming & Readback
Minimum current (Iout):
Current measured over interface:
High current (Iout):
Current measured over interface:
Both
Both
Both
Both
- 0.025
Iout - 0.025
249.9
Iout - 0.1
_______
_______
_______
_______
0.025
Iout + 0.025
250.1
Iout + 0.1
CC Load Effect:
Both - 0.025 _______ + 0.025
Current Sink Tests
100% of current rating: Both - 249.9 _______ - 250.1
RP7935A/RP7945A UUT Settings RP7935A/RP7945A Load Settings
Voltage Programming & Readback Min:
Voltage Programming & Readback High:
CV Load Effect, CV Ripple and Noise:
Transient Response:
Current Programming & Readback Min:
Current Programming & Readback High:
CC Load Effect:
100% of current rating (Isink):
Voltage priority: 0.08 V, 127.5 A
Voltage priority: 80 V, 127.5 A
Voltage priority: 40 V, 255 A
Voltage priority: 40 V, 255 A
Current priority: 40.4 V, 0 A
Current priority: 40.4 V, 250 A
Current priority: 80.8 V, 125 A
Current priority: 40.4 V, - 250 A
not used
not used
Current priority: 40.4 V, 250 A
Current priority: 40.4 V, 125 A to 250 A,slew=4 A/µs
Voltage priority: 40 V, 0 A
Voltage priority: 40 V, 255 A
Voltage priority: 80 V, 127.5 A
Voltage priority: 40 V, 255 A
Keysight RP7900 Series Operating and Service Guide 285
6 Verification and Calibration
To Next Page
Loading...
Need help?
General
