2 Getting Started
50 Keysight 34980A Mainframe User’s Guide
5 Install the module into a mainframe slot until it fully seats with the backplane
connector. Using a Pozidriv #1 screwdriver, tighten the two screws to secure
the module in the mainframe. Installation of the support sleeve is now
complete.
Wiring and Installing a Terminal Block
If you are planning to use an optional terminal block with your plug-in modules,
follow the next two procedures to connect your external wiring and install a
terminal block.
Before you begin this task, make sure you have disconnected power from all
external field wiring you will be connecting to the terminal block.
For plug-in module pinout diagrams and additional information, refer to the
User's Guide(s) shipped with the module(s).
To Next Page
Loading...
