Getting Started 2
Keysight 34980A Mainframe User’s Guide 59
– Set the real time clock and calendar;
– Set the radix character and thousand separator;
– Enable/disable the internal DMM;
– Query and update the firmware revisions for the mainframe and its modules.
Measurement configuration parameters are set using the Configure key group
(see descriptions on page 59)
Configure Key Group
Use these menus to set
measurement parameters.
The DMM Menu
– Set the internal DMM’s measurement function (AC volts, DC volts, AC
current, DC current, 2-wire ohms, 4-wire ohms, temperature, frequency, and
period)
– Set measurement function parameters
The Channel Menu
– Set channel measurement function (AC volts, DC volts, AC current (34921A
only), DC current (34921A only) 2-wire ohms, 4-wire ohms, temperature,
frequency, and period)
– Set measurement function parameters
The Scan Menu
– Set trigger-in parameters
– Set sweep count
– Set sample count
The Sequence Menu
– View a sequence command string
– Execute the sequence
– Delete sequence definitions
To Next Page
Loading...
