2 Getting Started
70 Keysight 34980A Mainframe User’s Guide
4 Using the knob to navigate through the menu choices, select the DC VOLTS
function.
5 Press the lighted Channel key to select this function and proceed to the next
parameter in the menu.
6 Use the knob to select the 100 mV range for the dc voltage function.
7 Continue pressing the lighted Channel key until CHANNEL LABEL is shown.
8 At the CHANNEL LABEL choice, use the knob (to select alphanumeric
characters) and the arrow keys (to select the cursor position) to enter a custom
channel label.
9 Press the lighted Channel key to save the assigned channel label and all other
changes you made.
To Next Page
Loading...
