Keysight 34980A - Page 76

2 Getting Started
76 Keysight 34980A Mainframe User’s Guide
4 Press EXIT MENU, which saves any changes and defaults all other parameters
in the Utility menu.
5 Wait for the DHCP server to assign a valid address; this operation can take
between 30 seconds and one minute to complete).
ENABLE LAN
NO YES
(Use knob to select YES)
LAN SETTINGS
VIEW MODIFY
(Use knob to make selection)
DHCP
OFF ON
(Use knob to select ON)
EXIT
MENU
Utility
UtilityUtility
LAN STATUS
DHCP BOOT
(Use knob to select
IP_ADDRESS)
IP_ADDRESS
xxx.xxx.xx.xx
Utility
EXIT
MENU
Utility
Remote I/O
I/O PORT
LAN GPIB USB
(Use knob to select LAN)
Utility
Front Panel Menu
Navigation Flow Diagram
Site LAN Connection
to Configure a