Getting Started 2
Keysight 34980A Mainframe User’s Guide 77
6 From the Utility menu (see Navigation Flow Diagram on page 76), navigate to
the LAN SETTINGS choice and select VIEW. Using the flow diagram as a
guide, view the instrument's IP address and other LAN settings. Write down
the IP address in the space below:
34980A IP Address: ___________________________
7 Press EXIT MENU.
8 Now you can use the integrated 34980A Web Browser Interface to access and
control the instrument. See “Launching the Web Interface” on page 85 for
more information.
9 If you plan to program the instrument over LAN using other software:
– Make sure you have installed the required I/O software on your computer.
–If you will be using the Keysight IO Libraries Suite, use its Connection
Expert utility to add the 34980A and verify a connection. When identifying
the instrument, it is easiest if you use the IP address noted in step 6 above.
– For an overview on programming instruments via LAN, refer to the
Connectivity Guide.
To Next Page
Loading...
