534 Keysight N9927-90001 User’s Guide
System Settings
System Configuration
This method will NOT set the correct Time Zone. You must do that using the
manual method. See below.
—Press.System 7
—Then System Configuration.
—Then More
—Then Update Time using Internet
— Connect a LAN cable that is also connected to the Internet.
—Then press Update Time using Internet
. When successful, a message is
displayed indicating the amount of time correction that occurred.
— Optional: Set the following when a Proxy server is used to connect to the
internet:
— Proxy Host – Enter the name of the proxy host.
— Proxy Port – Enter the port number of the proxy host.
How to MANUALLY set Date and Time, Format, and Time Zone
—Press System 7
—Then System Configuration.
—Then More
.
—Then Date and Time
.
— Press the arrows to highlight the row to be edited.
—Then press Edit
.
— Use the arrows or rotary knob to select the field to be edited.
Because of licensing security, the manual and GPS Sync methods to set
Date and Time are restricted as follows:
Can be set backward no more than 5 hours at a time.
Can be set forward any amount of time.
Can be set backward or forward no more than once in a day. A new day
begins at midnight.
There is no restriction for setting the Time Zone.
To change the Date and Time backward a significant amount, send an email to
ctd-soco_support@keysight.com.
BEFORE manually setting the Date and Time, be absolutely certain that the
Time Zone setting is correct.
To Next Page
Loading...
Need help?
General
