Keysight M8194A - Connection Status Subsystem; Run Status Subsystem

Keysight M8194A 120 GSa/s Arbitrary Waveform Generator User Guide 121
Remote Programming 4
Table 17 Frequency status register
Connection Status Subsystem
The Connection Status register contains the state of the USB connection
to the M8194A module.
The following SCPI commands and queries are supported:
:STATus:QUEStionable:CONNection[:EVENt]?
:STATus:QUEStionable:CONNection:CONDition?
:STATus:QUEStionable:CONNection:ENABle[?]
:STATus:QUEStionable:CONNection:NTRansition[?]
:STATus:QUEStionable:CONNection:PTRansition[?]
Table 18 Connection status register
Run Status Subsystem
The Run Status register contains the run status conditions of the individual
channels.
The following SCPI commands and queries are supported:
:STATus:OPERation:RUN[:EVENt]?
:STATus:OPERation:RUN:CONDition?
:STATus:OPERation:RUN:ENABle[?]
:STATus:OPERation:RUN:NTRansition[?]
:STATus:OPERation:RUN:PTRansition[?]
Bit Number Decimal Value Definition
0 Frequency warning 1 Output signal is invalid, because of an instable or
missing external reference clock.
Bit Number Decimal Value Definition
0 USB disconnected 1 USB module connection state