Keysight M8194A - Output Commands

Keysight M8194A 120 GSa/s Arbitrary Waveform Generator User Guide 133
Remote Programming 4
:OUTPut Commands
:OUTPut[1|4]:DIOFfset[?]
Command :OUTPut[1|4]:DIOFfset <value>|MINimum|MAXimum
Query :OUTPut[1|4]:DIOFfset?
Parameters <value>|MINimum|MAXimum
Parameter Suffix None
Description This command sets the differential offset. The hardware can compensate
for little offset differences between the normal and complement output.
“<value>” is the offset to the calibrated optimum DAC value, so the
minimum and maximum depend on the result of the calibration.
Examples Command
:OUTP:DIOF MAX
Query
:OUTP:DIOF? -> MAX
:OUTPut[1|4][:STATe][?]
Command :OUTPut[1|4][:STATe] OFF|ON|0|1
Query :OUTPut[1|4][:STATe]?
Parameters OFF|ON|0|1
Parameter Suffix None
Description This command enables or disables the amplifier of the output path for a
channel.
Examples Command
:OUTP1 ON
Query
:OUTP1? -> 1