Keysight M8194A - Upgrade Options; Installing Licenses

16 Keysight M8194A 120 GSa/s Arbitrary Waveform Generator User Guide
1 Introduction
Upgrade Options
For the M8194A, the following upgrade options are available.
Table 4 M8194A upgrade options
Installing Licenses
After you purchase a license and you acquire the corresponding license
file, you need to install the license on M8194A.
You can install the new license in the following ways:
1In the Keysight License Manager, click the Tools button, and then
select Install License File.... An Install License File(s) window appears.
In this window, browse to the location where you saved the license file.
Select the license file, and then click the Open button.
2 To manually install a license by entering the appropriate license file
information, click the Tools button, click Install License from Text....
The Install License from Text dialog box appears. Type in the license
data exactly as you received from Keysight. Click the Install button to
install the license.
Once the licenses are installed, you can use the Keysight License
Manager to view all licenses for the local system as depicted in the
following figure.
Options U02 and U04 are upgradeable using the KLM (Keysight License
Manager); see Table 4 on page -16.
Observe following steps while installing licenses:
1 Close the firmware of the M8194A.
2 Install the licenses using KLM.
3 Start the firmware of the M8194A. The firmware finds the new licenses
in KLM and installs them in the M8194A.
Option Description
M8194AU-U02 Upgrade from 1 channel to 2 channels
M8194AU-U04 Upgrade from 2 channels to 4 channels