Keysight M8194A 120 GSa/s Arbitrary Waveform Generator User Guide 169
Appendix 7
1 Select the required File Format from the drop-down list. for details on
supported file formats, see Supported File Types on page 94.
2Click File… button.
3In the Open dialog box, select the sample waveform file (as per
selected file format).
4Click Open.
5 Select the channels on which the waveform will be defined. When the
‘Send To Instrument’ button is pressed, the waveform will be sent to
all selected channels.
6Click Send to Instrument.
7Click “Run” button to start a waveform generation on the selected
channels.
To Next Page
Loading...
