84 Keysight M8194A 120 GSa/s Arbitrary Waveform Generator User Guide
3 M8194A Soft Front Panel
Compilation and Panel Control Section
• Save To File…
Signals can be stored in files in BIN format. These files may be reused
within the Import Waveform tab.
The waveform is always saved without applying corrections. Also, the
waveform of the data signal (Clock Toggle button is set to ‘D’) and not
the clock signal (Clock Toggle button is set to ‘C/2’ or ‘C/4’) is saved.
• Send To Instrument
Signal will be transferred to the selected segments of the selected
channels. The previous running status for the target instrument will be
preserved but sampling rate may be modified depending on the
waveform requirements.
• Set Default
All the waveform parameters are set automatically to their
corresponding default values.
• Abort
This button allows canceling signal calculation at any moment. It only
shows up during signal compilation.
To Next Page
Loading...
