Keysight N6702C - Page 38

[:IMMediate]
[:AMPLitude] <value>, (@chanlist) Sets the voltage priority resistance level. (N6781A, N6785A)
:STATe 0|OFF|1|ON, (@chanlist) Enables/disables the voltage priority resistance. (N6781A,
N6785A)
:SLEW
[:POSitive]
[:IMMediate] <value>|INFinity, (@chanlist) Sets the voltage slew rate.
:MAXimum 0|OFF|1|ON, (@chanlist) Enables/disables the maximum slew rate override.
:COUPle 0|OFF|1|ON, (@chanlist) Sets the current slew tracking state. (N679xA)
:NEGative
[:IMMediate] <value>|INFinity, (@chanlist) Sets the negative current slew rate. (N679xA)
:MAXimum 0|OFF|1|ON, (@chanlist) Enables/disables the maximum slew rate override. (N679xA)
STATus
:OPERation
[:EVENt]? (@chanlist) Queries the operation event register.
:CONDition? (@chanlist) Queries the operation condition register.
:ENABle <value>, (@chanlist) Sets the operation enable register.
:NTRansiton <value>, (@chanlist) Sets the negative transition filter.
:PTRansiton <value>, (@chanlist) Sets the positive transition filter.
:PRESet Presets all Enable, PTR, and NTR registers.
:QUEStionable
[:EVENt]? (@chanlist) Queries the questionable event register.
:CONDition? (@chanlist) Queries the questionable condition register.
:ENABle <value>, (@chanlist) Sets the questionable enable register.
:NTRansiton <value>, (@chanlist) Sets the negative transition filter.
:PTRansiton <value>, (@chanlist) Sets the positive transition filter.
SYSTem
:CHANnel
[:COUNt]? Returns the number of output channels in a mainframe.
:MODel? (@chanlist) Returns the model number of the selected channel.
:OPTion? (@chanlist) Returns the option installed in the selected channel.
:SERial? (@chanlist) Returns the serial number of the selected channel.
:COMMunicate
:LAN|TCPip:CONTrol? Returns the initial socket control connection port number.
:RLSTate LOCal|REMote|RWLock Configures the remote/local state of the instrument.
:ERRor? Reads and clears one error from the error queue.
:GROup? (GROup commands do NOT apply to models N678xA SMU)
:CATalog? Returns the groups that have been defined.
:DEFine <chanlist> Group multiple channels to create a single channel.
:DELete <channel> Remove the specified channel from the group.
:ALL Ungroups all channels.
1 Quick Reference
38 Keysight N6700C Operating and Service Guide