Keysight N6702C - Page 394

Test Record Form - Keysight N6777A
Keysight N6777A Report Number ______ Date__________
Test Description Model Min. Specs Results Max. Specs
Constant Voltage Tests
Voltage Programming & Readback
Minimum voltage (Vout):
Voltage measured over interface:
High voltage (Vout):
Voltage measured over interface:
+ 0 mV
Vout − 150 mV
149.7 V
Vout − 300 mV
_______
_______
_______
_______
+ 300 mV
Vout + 150 mV
150.3 V
Vout + 300 mV
CV Load Effect: – 68 mV _______ + 68 mV
CV Source Effect: – 15 mV _______ + 15 mV
CV Ripple and Noise
peak-to-peak:
rms:
N/A
N/A
_______
_______
+ 68 mV
+ 27 mV
Transient response
Voltage @ 250 μs: – 2.0 V _______ + 2.0 V
Constant Current Tests
Current Programming & Readback
Minimum current (Iout):
Current measured over interface:
High current (Iout):
Current measured over interface:
− 27 mA
Iout − 6 mA
1.967 A
Iout − 9 mA
_______
_______
_______
_______
+ 33 mA
Iout + 6 mA
2.033 A
Iout + 9 mA
CC Load Effect: – 6 mA _______ + 6 mA
CC Source Effect: – 1 mA _______ + 1 mA
Test Description N6777A Setting
Voltage Programming & Readback Min Voltage:
Voltage Programming & Readback High Voltage:
CV Load Effect, Source Effect, Ripple and Noise:
Transient Response:
Current Programming & Readback Min Current:
Current Programming & Readback High Current:
CC Load Effect, Source Effect:
150 mV, 2 A
150 V, 2 A
150 V, 2 A
150 V, from 1 A to 2 A
3 mA, 150 V
2 A, 150 V
2 A, 150 V
6 Verification and Calibration
394 Keysight N6700C Operating and Service Guide