Keysight N9000B - Inner Offset (Sweep); Offset Freq Define; Offset Detector; Cumulate Mask

3 VMA Mode
3.9 SEM Measurement
Saved in instrument state
Range Auto|Man
Min/Max 0.00001/3000000
Inner Offset (Sweep)
Accesses a menu that enables you to set up the sweep measurement parameters for
inner offset pairs.
Offset Freq Define
Same as "Offset Freq Define" on page 1522 under Inner Offset (BW)
Offset Detector
Same as "Offset Detector" on page 1487 under Inner Offset (BW)
Cumulate Mask
Same as "Cumulate Mask " on page 1525 under Inner Offset (BW)
Cumulate Mask Stop Frequency
Same as "Cumulate Mask Stop Frequency" on page 1526, under Inner Offset (BW)
Start Freq
Same as "Start Freq" on page 1526, under Inner Offset (BW)
Stop Freq
Same as "Stop Freq" on page 1527, under Inner Offset (BW)
Sweep Time
Specifies the sweep time for the currently selected offset and enables you to toggle
the Sweep Time mode between Auto and Man.
Vector Modulation Analyzer Mode User's &Programmer's Reference 1532