Keysight N9000B - 4.3.6 Loaded Modes (Remote Query Only); 4.3.7 User Interface; 4.3.7.1 Menu Panel Position

4 System
4.3 Preload / Unload Modes
Command
Example
:INST:UNL NR5G
Notes Error message if the specified Mode is not available,
-224,"Illegal parameter value;<mode> is not a valid choice"
Error message if the specified Mode is not loaded and therefore cannot be unloaded,
-221,"Settings conflict;<mode> is not loaded"
Error message if the specified Mode is used by other Modes and therefore cannot be unloaded,
-221,"Settings conflict;<mode> is used by <other modes>"
Error message if the specified Mode does not support Unload Mode feature and therefore cannot be
unloaded,
-221,"Settings conflict;Feature not supported for this Mode"
4.3.6 Loaded Modes (Remote Query Only)
Returns a list of loaded Modes.
Remote Command
:SYSTem:APPLication:LOADed?
Example
:SYST:APPL:LOAD?
Preset Not affected by Preset
4.3.7 User Interface
Configures functions specific to the User Interface, such as the menu panel
orientation and the display color theme.
4.3.7.1 Menu Panel Position
Allows the Menu Panel to be positioned on the RIGHt or LEFT side of the display.
Remote
Command
:SYSTem:DISPlay:MPPosition RIGHt | LEFT
:SYSTem:DISPlay:MPPosition?
Example
:SYST:DISP:MPP LEFT
Preset This is unaffected by Preset but is set to RIGHt by Restore Defaults > "User Interface" on page 1891 or
Restore Defaults >"All" on page 1893
State Saved Power On Persistent (survives shutdown and restart)
Vector Modulation Analyzer Mode User's &Programmer's Reference 1866