Keysight N9000B - 3.1.1.2 Measurement Results for RI = 01 or Not Specified

3 VMA Mode
3.1 Digital Demod Measurement
RI Return Value
09 Dependent on Modulation Format. See "Measurement Results for RI = 09" on page 205
10 Dependent on Modulation Format. See "Measurement Results for RI = 10" on page 206
11 Dependent on Modulation Format. See "Measurement Results for RI = 11" on page 206
12 Dependent on Modulation Format. See "Measurement Results for RI = 12" on page 207
13 Dependent on Modulation Format. See "Measurement Results for RI = 13" on page 207
14 Dependent on Modulation Format. See "Measurement Results for RI = 14" on page 207
15 Dependent on Modulation Format. See "Measurement Results for RI = 15" on page 208
16 Dependent on Modulation Format. See "Measurement Results for RI = 16" on page 208
17 Dependent on Modulation Format. See "Measurement Results for RI = 17" on page 208
18 Demod bits
Returns the demodulation bits
19 BER Results
–
Tx BER (exponential)
–
Error Bits Number (exponential)
–
Total Bits Number (exponential)
20 Dependent on Modulation Format. See "Measurement Results for RI = 20" on page 209
21 Dependent on Modulation Format. See "Measurement Results for RI = 21" on page 209
22
–
ccEVM results of segment1
–
ccEVM (%)
–
Valid Points
–
Total Points
–
Improvement Factor (dB)
Note: The EVM result will be in “dB” if “Report EVM in dB” is set to true
23 Frame Summary Results for each segment
–
Data EVM (%)
–
Pilot EVM (%)
Note: These results are only available for complicated segment including both data and pilot
24 Returns ccEVM per symbol magnitude results
3.1.1.2 Measurement Results for RI = 01 or Not Specified
In the tables below, the value in the A/P column is one of:
Vector Modulation Analyzer Mode User's &Programmer's Reference 186