3 VMA Mode
3.1 Digital Demod Measurement
Go to Row
Enables you to move through the table to edit the desired point.
Min 1
Max 2000
Insert Row Below
Inserts a row below the current row. The new row is a copy of the current row and
becomes the current row. The new row is not yet entered into the underlying table,
and the data in the row is displayed in light gray.
Delete Row
This is an immediate action control. It immediately deletes the currently-selected
row regardless of the row is being edited or not. The row following the currently-
selected row (or the row preceding if there is none) will be selected.
Clear Table
This is an immediate action control. It immediately clears the table.
Phase Rotation
Specifies the phase to rotate the constellation.
Couplings This control is only available when Axis Type is Magnitude vs Phase
Preset 0.0
State Saved Saved in instrument state, survives Preset
Min -360
Max 360
Apply Phase Rotation
Updates the phase column and rotates constellation per Phase Rotation value, the
Phase Rotation will then be reset to zero.
Couplings Only available when Axis Type is Magnitude vs Phase
Vector Modulation Analyzer Mode User's &Programmer's Reference 360
To Next Page
Loading...
