Keysight N9000B - 7.2.44 Resource Map; 7.2.45 Resource Modulation; 7.2.46 Filter Coefficients

7 Save/Recall/Print
7.2 Recall
Remote Command
:MMEMory:LOAD:OFDM:IQPReamble CC0 | … | CC7,<filename>
Example
:MMEM:LOAD:OFDM:IQPR CC0,"pmblIq.csv"
Dependencies Only appears in VMA Mode, in the Custom OFDM measurement
Status Bits/OPC
dependencies
Sequential - aborts the current measurement
7.2.44 Resource Map
Selects a CSV file from which to import the defined resource map.
Note the resource map information recalled from the CSV file is not visible/editable
under Meas Setup > Demod > Demod Settings > Resource Mapping.
Remote Command
:MMEMory:LOAD:OFDM:RMAP CC0 | … | CC7,<filename>
Example
:MMEM:LOAD:OFDM:RMAP CC0,"resourcemap.csv"
Dependencies Only appears in VMA Mode, in the Custom OFDM measurement
Status Bits/OPC depend-
encies
Sequential - waits for previous measurement to complete
7.2.45 Resource Modulation
Selects a CSV file from which to import the defined resource modulation.
Note the resource modulation information recalled from the CSV file is not
visible/editable under Meas Setup > Demod > Demod Settings > Resource Mapping.
Remote Command
:MMEMory:LOAD:OFDM:RMODulation CC0 | … | CC7,<filename>
Example
:MMEM:LOAD:OFDM:RMOD CC0,"resourcemodulation.csv"
Dependencies Only appears in VMA Mode, in the Custom OFDM measurement
Status Bits/OPC
dependencies
Sequential - waits for previous measurement to complete
7.2.46 Filter Coefficients
Selects a file from which to import the Arbitrary filter coefficients data.
Filter Coefficients files are CSV files, and contain the filter coefficients data in a form
that can be imported into Excel or similar spreadsheets, as well as header data that
gives information on the filters.
Filter Coefficients files have the extension .csv, and the default path is:
My Documents\VMA\data\CustomOFDM\FilterCoef
2344 Vector Modulation Analyzer Mode User's &Programmer's Reference