3 VMA Mode
3.11 Phase and Amplitude vs Time Measurement
View Listing Query
Returns a string containing a comma-separated list of names for all the Views,
including User Views, available for the current Measurement.
Remote
Command
:DISPlay:VIEW:ADVanced:CATalog?
Example
:DISP:VIEW:ADV:CAT?
Notes Returns a quoted string of the available Views for the current measurement, separated by commas. The
list includes names for all the Views, including User Views, available for the current Measurement
Example:
"Normal,Trace Zoom,Spectrogram,Baseband,myView1,yourView1"
No distinction is made between Predefined and User Views
If you switch measurements with the display disabled (via :DISP:ENAB OFF), then query the list of
available Views, the result is undefined
User View Listing Query
Returns a string containing a comma-separated list of names for only the User
Views available for the current Measurement.
Remote
Command
:DISPlay:VIEW:ADVanced:USER:CATalog?
Example
:DISP:VIEW:ADV:USER:CAT?
Notes Returns a quoted string of the available User Views for the current measurement, separated by
commas.
Example:
"Baseband,myView1,yourView1"
If you switch measurements with the display disabled (see "Display Enable (Remote Command Only)"
on page 1812), then query the list of available Views, the result is undefined
3.11.5.3 Annotation
Contains controls for setting up the annotation for the current Mode or
Measurement.
Graticule
Turns the display graticule On or Off for all windows with graticules in all
measurements in the current Mode. Also turns the graticule Y-Axis annotation on
and off.
Vector Modulation Analyzer Mode User's &Programmer's Reference 1810
To Next Page
Loading...
