Keysight N9000B - 7.3.42 Product Description; 7.3.43 Comment; 7.3.44 Meas Setup On;Off; 7.3.45 Disturbance List On;Off

7 Save/Recall/Print
7.3 Save
7.3.42 Product Description
See PD - Mode - EMI Receiver.docx
7.3.43 Comment
See PD - Mode - EMI Receiver.docx
7.3.44 Meas Setup On/Off
See PD - Mode - EMI Receiver.docx
7.3.45 Disturbance List On/Off
See PD - Mode - EMI Receiver.docx
7.3.46 Trace (All Traces) On/Off
See PD - Mode - EMI Receiver.docx
7.3.47 Channel On/Off
See PD - Mode - EMI Receiver.docx
7.3.48 Limit
Lets you choose a file to which to export the Limit data.
Limit files are CSV files, and contain the limit data in a form that can be imported
into Excel or similar spreadsheets, as well as header data that gives information on
the limit.
The default path for most Limits files is:
My Documents\<mode name>\data\limits
where <mode name> is the parameter used to select the mode with the :INST:SEL
command (for example, SA for Spectrum Analyzer). Hence a Limit file from any
measurement in Spectrum Analyzer Mode would be stored in:
My Documents\SA\data\limits
Vector Modulation Analyzer Mode User's &Programmer's Reference 2399