Keysight N9000B - 4.2.4 System IDN Response; 4.2.4.1 System IDN Response

4 System
4.2 I/O Config
This control lets you set the web password as desired, or to reset the password to
the factory default.
Selecting Web Password Reset displays a control for resetting the password as
desired, or to the factory default. The built-in alpha keyboard appears. You may
change the password from the factory default of “measure4u”.
You can cancel this entry by pressing the Cancel (ESC) front-panel key.
Dependencies Not available in UXM
4.2.4 System IDN Response
Allows you to specify a response to *IDN?, return the instrument to the FACTory
response if you have changed it, or, if your test software is expecting the *IDN
response to indicate Agilent Technologies, configure the instrument to respond with
Agilent as the manufacturer.
The current *IDN response is displayed at the top of the panel, followed by the
System IDN Response and User IDN controls.
4.2.4.1 System IDN Response
To select the factory-set response, select FACTory. To specify your own response,
select USER. You can enter your desired response using "User IDN" on page 1851.
If your test software expects the response to indicate Agilent Technologies as the
Manufacturer, you can configure this response by selecting AGILent.
Remote
Command
:SYSTem:IDN:CONFigure FACTory | AGILent | USER
For option details, see "More Information" on page 1850
:SYSTem:IDN:CONFigure?
Example
:SYST:IDN:CONF FACT
Notes Affects the response returned by all Modes of the instrument, unless the current Mode has also
specified a custom response, in which case the current Mode’s custom IDN response takes precedence
over the System’s, but only while that Mode is current
Survives shutdown and restart of the software and therefore survives a power cycle
Preset The *IDN response is reset to FACTory by Restore Defaults >"Misc" on page 1892 or Restore
Defaults >"All" on page 1893 and survives subsequent running of the software
More Information
Here are details of the options available for the System *IDN response:
Vector Modulation Analyzer Mode User's &Programmer's Reference 1850