Keysight N9000B - Synchronization Reference Offset; Synchronization Search Interval

3 VMA Mode
3.2 Custom OFDM Measurement
Remote
Command
[:SENSe]:OFDM:CCARrier0|…|7:SYNChronize:REFerence:INTerval <int>
[:SENSe]:OFDM:CCARrier0|…|7:SYNChronize:REFerence:INTerval?
Example
:OFDM:CCAR0:SYNC:REF:INT 10
:OFDM:CCAR0:SYNC:REF:INT?
Preset 10
State Saved Saved in instrument state
Min 1
Max Depends on Max Result Length
Synchronization Reference Offset
Sets the offset of the reference signal to use for synchronization.
Remote
Command
[:SENSe]:OFDM:CCARrier0|…|7:SYNChronize:REFerence:OFFSet <int>
[:SENSe]:OFDM:CCARrier0|…|7:SYNChronize:REFerence:OFFSet?
Example
:OFDM:CCAR0:SYNC:REF:OFFS 0
:OFDM:CCAR0:SYNC:REF:OFFS?
Preset 0
State Saved Saved in instrument state
Min 0
Max Depends on Max Result Length
Synchronization Search Interval
Sets the synchronization search interval (in symbols) used when synchronizing to
the signal.
Remote
Command
[:SENSe]:OFDM:CCARrier0|…|7:SYNChronize:SEARch:INTerval <int>
[:SENSe]:OFDM:CCARrier0|…|7:SYNChronize:SEARch:INTerval?
Example
:OFDM:CCAR0:SYNC:SEAR:INT 10
:OFDM:CCAR0:SYNC:SEAR:INT?
Preset 10
State Saved Saved in instrument state
Min 1
Max Depends on Max Result Length
527 Vector Modulation Analyzer Mode User's &Programmer's Reference