Features of your vehicle
164
Vehicles equipped with a theft alarm
system will have a label attached to
the vehicle with the following words:
1. WARNING
2. SECURITY SYSTEM
This system is designed to provide
protection from unauthorised entry
into the car. This system is operated
in three stages: the first is the
“Armed” stage, the second is the
“Theft-alarm” stage, and the third is
the “Disarmed” stage. If triggered,
the system provides an audible
alarm with blinking of the hazard
warning lights.
Armed stage
Using the smart key
Park the vehicle and stop the engine.
Arm the system as described below.
1.Turn off the engine.
2.Make sure that all doors (and tail-
gate) and the engine bonnet are
closed and latched.
3.• Lock the doors by pressing the
button of the front outside door
handle with the smart key in your
possession.
After completion of the steps
above, the hazard warning lights
operate once to indicate that the
system is armed.
If any door remains open, the
doors won’t lock and the chime
will sound for 3 seconds. Close
the door and try again to lock the
doors.
If tailgate or engine bonnet
remains open, the hazard warn-
ing lights won’t operate and theft-
alarm will not arm. After this, if the
tailgate and engine bonnet are
closed, the hazard warning lights
will blink once.
THEFT-ALARM SYSTEM (IF EQUIPPED)
OJC040170
Armed
stage
Theft-alarm
stage
Disarmed
stage
To Next Page
Loading...
