Kia Ceed - Rear Turn Signal Lamp (Bulb Type) Bulb Replacement (Rear Combination Lamp Type A, B); Side Repeater Lamp (Bulb Type) Bulb Replacement

1068
Maintenance
Side repeater lamp (Bulb type)
bulb replacement
1. Remove the lamp assembly from
the vehicle by prying the lens and
pulling the assembly out.
2. Disconnect the bulb electrical con-
nector.
3. Separate the socket and the lens
parts by turning the socket coun-
terclockwise until the tabs on the
socket align with the slots on the
lens part.
4. Remove the bulb by pulling it
straight out.
5. Insert a new bulb in the socket.
6. Reassemble the socket and the
lens part.
7. Connect the bulb electrical con-
nector.
8. Reinstall the lamp assembly to the
body of the vehicle.
Rear turn signal lamp (Bulb
type) bulb replacement (Rear
combination lamp Type A, B)
1. Open the tailgate.
2. Open the service cover.
3. Loosen the light assembly retain-
ing screws with a cross-tip screw
driver.
OTA070028
OCD078053