Features of your vehicle
344
Opening the bonnet
1. Pull the release lever to unlatch
the bonnet. The bonnet should
pop open slightly.
2. Go to the front of the vehicle, raise
the bonnet slightly, push the sec-
ondary latch (1) inside of the bon-
net centre and lift the bonnet (2).
3. Pull the support rod from the bon-
net.
4. Hold the bonnet open with the
support rod.
BONNET
OCD048047R
OCD048048 OCD048049
WARNING
Open the bonnet after turning off
the engine on a flat surface,
shifting the shift lever to the
P(Park) position for automatic
transaxle/dual clutch transmis-
sion and to the 1st(First) gear or
R(Reverse) for manual transaxle,
and setting the parking brake.