435
Features of your vehicle
Bonnet open warning
(if equipped)
The warning message will appear on
the LCD display when bonnet is
open.
The warning chime will operate when
the vehicle is being driven at or
above 3 km/h (2 mph) with the bon-
net open.
Closing the bonnet
1. Before closing the bonnet, check
the following:
• All filler caps in engine compart-
ment must be correctly installed.
• Gloves, rags or any other com-
bustible material must be
removed from the engine com-
partment.
2. Return the support rod to its clip to
prevent it from rattling.
3.Lower the bonnet until it is about
30 cm above the closed position
and let it drop. Make sure that it
locks into place.
4. Check that the bonnet has
engaged properly. If the bonnet
can be raised slightly, it is not
properly engaged.
Open it again and close it with a lit-
tle more force.
OCD048105
WARNING - Hot parts
Grasp the support rod in the
area wrapped in rubber. The
rubber will help prevent you
from being burned by hot metal
when the engine is hot.
To Next Page
Loading...
