693
Driving your vehicle
Recognizing pedestrians
- The pedestrian is not fully captured
by the camera sensor, or the
pedestrian does not walk in the
upright position.
- The pedestrian moves very fast.
- The pedestrian abruptly appears in
front.
- The pedestrian wears clothes in
the colour similar to the back-
ground.
- The outside is too bright or too
dark.
- The vehicle drives at night or in the
darkness.
- There is an item similar to a per-
son’s body structure.
- The pedestrian is small.
- The pedestrian has impaired
mobility.
- It is difficult to distinguish the
pedestrian from the surroundings.
- The sensor recognition is limited.
- There is a group of pedestrians.
- If a sudden change in the sensor
recognition takes place whilst
passing through the speed bump,
- When the vehicle is severely shak-
en,
- When driving around circular inter-
section after the vehicle in front,
- If the front of the camera lens is
contaminated by front glass tinting,
film, water repellent coating, dam-
age on glass, foreign matter (stick-
er, insect, etc.)
- The radar or camera or camera
lens is damaged.
- If the headlights of the vehicle are
not used at night or in the tunnel
section, or the light is too weak
- If street light or the light of the vehi-
cle coming from the opposite is
reflected or when sunlight is
reflected by the water on the road
surface
- When the back light is projected in
the direction of the vehicle's motion
(including the headlights of vehi-
cles)
- Road sign, shadow on the road,
tunnel entrance, toll gate, partial
pavement
- If the windscreen has moisture on
its surface or if windscreen freezes,
- Driving in the fog.
- When objects are out of the sens-
ing range of the sensor or radar.
- When the cyclist in front is riding
intersected with the driving direc-
tion
- When there is any other electro-
magnetic interference
- When the construction area, rail or
other metal object is near the
cyclist
- If the bicycle material is not reflect-
ed well on the radar
To Next Page
Loading...
