What to do in an emergency
307
Using the Tyre Mobility Kit
1. Detach the speed restriction label
(1) from the sealant bottle (2), and
place it in a highly visible place
inside the vehicle such as on the
steering wheel to remind the driv-
er not to drive too fast.
2. Filling the sealant Strictly follow
the specified sequence, otherwise
the sealant may escape under
high pressure.
3. Shake the sealant bottle.
4. Connect the filling hose (3) onto
the connector of the sealant bottle
(A).
5. Ensure that button (9) on the com-
pressor is not pressed.
6. Unscrew the valve cap from the
valve of the defective wheel and
screw filling hose (3) of the sealant
bottle onto the valve.
7. Insert the sealant bottle into the
housing of the compressor so that
the bottle is upright (B).
8. Ensure that the compressor is
switched off, position 0.
OYN064021 OCD068005
To Next Page
Loading...
