6111
Driving your vehicle
Speed setting
To set cruise control speed:
1. Press the CRUISE button, to turn
the system on. The CRUISE indi-
cator in the instrument cluster will
illuminate.
2. Accelerate to the desired speed.
The smart cruise control speed
can be set as follows:
• 10 km/h (5mph) ~ 180 km/h (110
mph): when there is no vehicle in
front
• 0 km/h (0 mph) ~ 180 km/h (110
mph): when there is a vehicle in
front
3. Move the lever down (to SET-),
and release it at the desired
speed. The set speed and vehicle
to vehicle distance on the LCD
screen will illuminate.
4. Release the accelerator pedal.
The desired speed will automati-
cally be maintained.
If there is a vehicle in front of you, the
speed may decrease to maintain the
distance to the vehicle ahead.
On a steep grade, the vehicle may
slow down or speed up slightly whilst
going uphill or downhill.
Vehicle speed may decrease on an
upward slope and increase on a
ownward slope.
The speed will be set to 30km/h
when there is a vehicle ahead and
your vehicle speed is 0~30km/h.
Also, the speed will be set to 30km/h
when there is no vehicles ahead and
your vehicle speed is 10~30km/h.
OCD058012
OCD058014
To Next Page
Loading...
