EasyManua.ls Logo

Kia Ceed - SRS Components and Functions

Kia Ceed
743 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
355
Safety features of your vehicle
SRS components and func-
tions
The SRS consists of the following
components:
1. Driver's front air bag module
2. Passenger's front air bag module
3. Side air bag modules*
4. Curtain air bag modules*
5. Retractor pre-tensioner assem-
blies*
6. Air bag warning light
7. SRS control module (SRSCM) /
Rollover sensor*
8. Front impact sensors
9. Side impact sensors
10. Passenger’s front air bag
ON/OFF switch
11. Passenger’s front air bag
ON/OFF indicator
* : if equipped
The SRSCM continually monitors all
SRS components whilst the ignition
switch is ON to determine if a crash
impact is severe enough to require
air bag deployment or pre-tensioner
seat belt deployment.
The SRS air bag warning light " "
on the instrument panel will illumi-
nate for about 6 seconds after the
ignition switch is turned to the ON
position, after which the SRS air bag
warning light " " should go out.
OYD036007R
WARNING
If any of the following conditions
occurs, this indicates a malfunc-
tion of the SRS. In this case,
have the system inspected by a
professional workshop. Kia rec-
ommends to visit an authorised
Kia dealer/service partner.
The light does not turn on
briefly when you turn the igni-
tion ON.
The light stays on after illumi-
nating for approximately 6
seconds.
The light comes on whilst the
vehicle is in motion.
The light blinks when the igni-
tion switch is in ON position.

Table of Contents

Related product manuals