Driving your vehicle
1466
LKA system operation
To activate/deactivate the LKA:
With the ignition switch in the ON posi-
tion, LKA turns on automatically. The
indicator ( ) in the cluster display
will initially illuminate white. If you press
the LKA button located on the instru-
ment panel on the lower right hand
side of the driver, LKA will be turned off
and the indicator on the cluster display
will go off.
The colour of indicator will change
depend on the condition of LKA.
- White : Sensor does not detect
the lane marker or vehicle
speed is less than
64km/h(40mph).
- Green : Sensor detects the lane
marker or road edge and
system is able to control
the steering.
LKA system activation
• To see the LKA system screen on
the LCD display in the cluster, Tab
to the ASSIST mode ( ).
• For further details, refer to [menu
settings] in chapter 4, [crash pad].
• After LKA system is activated, if
both lane markers or road edge
are detected, vehicle speed is over
64km/h (40mph) and all the activa-
tion conditions are satisfied, a
green steering wheel indicator will
illuminate and the steering wheel
will be controlled.
OCD058022R
To Next Page
Loading...
