Kia Ceed - Setup; Display; Sound; Date;Time

Audio system
532
Display
You can change the settings related
to the system display.
On the control panel, press the
[SETUP/CLOCK]  [1] buttons to
select Display.
• Dimming mode: Set the screen
brightness to be adjusted automat-
ically according to ambient lighting
conditions or set the screen to stay
bright or dark continuously.
• Brightness: Adjust the brightness
for the day or night mode accord-
ing to your setting in the Dimming
mode option.
• Screensaver: Select a screen
saver option to be displayed when
the system is turned off.
Sound
You can change the settings related
to sounds, such as location where
sound will be concentrated and the
output level for each range.
On the control panel, press the
[SETUP/CLOCK]  [2] buttons to
select Sound.
• Position: Select a location where
sound will be concentrated in the
vehicle. Select Fade or Balance,
turn the [TUNE] knob to select the
desired position, and then press
the knob. To set sound to be cen-
tred in the vehicle, select Centre.
• Equaliser: Adjust the output level
for each sound tone mode.
• Speed dependent volume control:
Set the volume to be adjusted
automatically according to your
driving speed.
• Rear parking sensors prioritised:
Set to decrease the audio volume
to hear a reverse warning prior to
other sounds whilst reversing your
vehicle.
✽
NOTICE
• Depending on vehicle models or
specifications, available options
may vary.
• Depending on the system or ampli-
fier specifications applied to your
vehicle, available options may
vary.
Date/Time
You can change the date and time
that are shown on the system dis-
play.
On the control panel, press the
[SETUP/CLOCK]  [3] buttons to
select Date/Time.
• Set time: Set time to display on the
system display.
• Time format: Select to display
time in the 12 hour format or the 24
hour format.
• Set date: Set date to display on the
system display.
SETUP