Driving your vehicle
1046
Intelligent Speed Limit Warning
activation / deactivation
• The driver can activate the ISLW
by selecting ‘User Settings →
Driver Assistance → Intelligent
Speed Limit Warning’.
• When the ISLW is activated, the
symbols appear on the instrument
cluster to display the speed limit
information and overtaking restric-
tion, when your vehicle passes by
the relevant traffic signs.
• When the ISLW is activated in the
navigation setting, the above infor-
mation and the restriction are also
displayed on the navigation.
• The ISLW displays the previous
speed limit information, right after
the ignition switch is placed to the
ON position.
• You may find different speed limit
information for the same road. The
information is displayed depending
on the driving situations. Because,
traffic signs with additional
sign(e.g. rainy, arrow, etc.) are also
detected and compared with vehi-
cle internal data(e.g. wiper opera-
tion, turn signal, etc.)
Operation
• If a traffic sign that is relevant to
your vehicle is passed, the system
displays the information of the
speed limits and no passing
restrictions to the driver.
• When the driver turn on the igni-
tion, the system displays stored
information of the speed limit
before turn off the ignition.
• Sometimes different speed limits
are displayed for the same road.
The information displayed depend-
ing on the situation. Because, traf-
fic signs with additional sign (e.g
rainy, arrow...) are also detected
and compared with vehicle interior
data(e.g wiper operation, turn sig-
nal...).
• The system can update the speed
limit information without visible
speed limit signs in the following
situations.
- When you change your driving
direction with right or left or U
turning.
- When vehicle changes roads.
(e.g. from highway to country
road…)
- When you enter or exit into town
or village.
NOTICE
If speed limit value has the differ-
ence between cluster and navigation,
check the speed unit setting in navi-
gation.
To Next Page
Loading...
