1148
Maintenance
Room lamp (Bulb type) bulb
replacement
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
Personal lamp (LED type) bulb
replacement
If the personal lamp (LED) (1) does
not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The LED lamp cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamp has to be
replaced with the unit.
A skilled technician should check or
repair the personal lamp (LED), for it
may damage related parts of the
vehicle.
OQL075068
WARNING
Prior to working on the Interior
lamps, ensure that the “OFF”
button is depressed to avoid
burning your fingers or receiv-
ing an electric shock.
CAUTION
Be careful not to dirty or dam-
age the lens, lens tab, and plas-
tic housings.
OCD078065
To Next Page
Loading...
