37
Safety features of your vehicle
Seatback angle
Turn the control knob forward or rear-
ward to move the seatback to the
desired angle.
Seat cushion height (if equipped)
To change the height of the seat
cushion, push the lever that is locat-
ed on the outside of the seat cushion
upwards or downwards.
• To lower the seat cushion, push the
lever down several times.
• To raise the seat cushion, pull the
lever up several times.
Lumbar support (if equipped)
The lumbar support can be adjusted
by pressing the lumbar support
switch on the side of the seat.
1. Press the front portion of the
switch to increase support, or the
rear portion of the switch, to
decrease support.
2. Release the switch once it reach-
es the desired position.
OCD038003R OCD038004R OCD038055R
To Next Page
Loading...
