39
Safety features of your vehicle
Seatback angle
Push the control switch forward or
rearward to move the seatback to the
desired angle.
Release the switch once the seat
reaches the desired position.
Seat height
Pull the front portion of the control
switch up to raise or down to lower
the front part of the seat cushion. Pull
the rear portion of the control switch
up to raise or down to lower the seat
cushion.
Release the switch once the seat
reaches the desired position.
Lumbar support (if equipped)
The lumbar support can be adjusted
by pressing the lumbar support
switch on the side of the seat.
1. Press the front portion of the
switch to increase support, or the
rear portion of the switch, to
decrease support.
2. Release the switch once it reach-
es the desired position.
OCD038007R OCD038008ROCD038006R
To Next Page
Loading...
