Kia Ceed - Page 310

Audio system
524
Connecting a paired device
To use a Bluetooth device on your
system, connect the paired device to
the system.Your system can connect
with only one device at a time.
1. From the control panel, press the
[SETUP/CLOCK] button, and then
select Bluetooth  Connections.
• If there is no connected device,
press the [PHONE] button on
the control panel or the
Call/Answer button on the steer-
ing wheel.
2. Turn the [TUNE] knob to select the
device to connect, and then press
the knob.
• If another device is already con-
nected to your system, discon-
nect it. Select the connected
device to disconnect.
3. Turn the [TUNE] knob to select
Connect, and then press the
knob.
✽
NOTICE
• If a connection ends because a
device is out of the connection
range or a device error occurs, the
connection will be restored auto-
matically when the device enters
the connection range or when the
error is cleared.
• The Bluetooth connection is
unavailable when the device’s
Bluetooth function is turned off.
Be sure to turn on the device’s
Bluetooth function.
• Depending on auto connection pri-
ority, connection to a device may
take time.
Disconnecting a device
If you want to stop using a Bluetooth
device or connect another device,
disconnect your currently connected
device.
1. From the control panel, press the
[SETUP/CLOCK] button, and then
select Bluetooth  Connections.
2. Turn the [TUNE] knob to select the
device to disconnect, and then
press the knob.
3. Turn the [TUNE] knob to select
Disconnect, and then press the
knob.
Deleting paired devices
If you no longer want a Bluetooth
device paired or if you want to con-
nect a new device when the
Bluetooth device list is full, delete
paired devices.
1. From the control panel, press the
[SETUP/CLOCK] button, and then
select Bluetooth  Connections.
2. Turn the [TUNE] knob to select the
device to delete, and then press
the knob.
3. Turn the [TUNE] knob to select
Delete, and then press the knob.
✽
NOTICE
• When you delete a paired device,
the Call history and Contacts
stored in the system are also delet-
ed.
• To re-use a deleted device, you
must pair the device again.