EasyManua.ls Logo

Kia Ceed - Page 32

Kia Ceed
743 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
311
Safety features of your vehicle
Recalling positions from memory
1. Shift the shift lever into P or N (for
Dual clutch transmission and
Automatic transaxle) or Neutral
(for Manual transaxle) whilst the
engine start/stop button is ON or
ignition switch ON.
2. To recall the position in the memo-
ry, press the desired memory but-
ton (1 or 2). The system will beep
once, then the driver’s seat will
automatically adjust to the stored
position.
Adjusting the control switch for the
driver’s seat whilst the system is
recalling the stored position will
cause the movement to stop and
move in the direction that the control
switch is moved.
Initializing Driver position memory
system
Initialize Driver position memory sys-
tem as follows if the system fails to
function properly.
Initialization method
1. Have the vehicle completely
stopped, the ignition [ON], and the
shift lever placed into P (Parking).
Afterwards, open the door on dri-
ver’s side.
2. Using the control switches for for-
ward or backward and seatback
angle, pull the seat forward to the
fullest and the seatback upright
forward to the fullest.
3. Press both [SET] button and the
forward movement control switch
at the same time for two seconds.
Initialization process
1. The alarm sounds and the initial-
ization process starts.
2. The driver seat and its seatback
automatically move backward. The
alarm continues to sound during
the movement.
3. The seat and seatback move to
the centre and the alarm sounds
and the initialization is completed.
In the following cases, however, the
initialization process and the alarm-
ing sound come to a stop.
- When Driving position memory sys-
tem button is pressed
- When the control switches for dri-
ver’s seat are pressed
- When the shift lever was displaced
from [P] to another position
- When vehicle is ran at the speed of
3km/h or faster
- When the door on the driver’s side
is closed
WARNING
Use caution when recalling the
adjustment memory whilst sit-
ting in the vehicle. Push the
seat position control switch to
the desired position immediate-
ly if the seat moves too far in
any direction.

Table of Contents

Related product manuals